Removal and Installation

Partially drain cooling system. Refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
Disconnect the engine vent hose and radiator overflow hose.

Fig 1: Disconnecting Engine Vent Hose And Radiator Overflow Hose
Courtesy of FORD MOTOR CO.
Disconnect the degas bottle supply hose.

Fig 2: Disconnecting Degas Bottle Supply Hose
Courtesy of FORD MOTOR CO.
Remove the bolts and the degas bottle.

Fig 3: Removing Bolts Of Degas Bottle
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.
- Apply Threadlock 262 - to the bolts threads