LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System - Excursion & F250-F550 Super Duty >> Removal And Installation >> Cooling Fan Stator - 6.0L Diesel >> Removal and Installation

Removal and Installation

  1. Remove the cooling fan. Refer to COOLING FAN - 6.0L DIESEL .
    2. NOTE: Early build will have five bolts. Late build will have four bolts.
    Fig 1: Removing Bolts Of Cooling Fan Stator
    G02773032Courtesy of FORD MOTOR CO.
  2. Remove the bolts and cooling fan stator.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals