LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Locking Hubs >> Four-Wheel Drive Systems - Excursion & F250-F550 Super Duty >> Removal And Installation >> Pulse Vacuum Hublock (PVH) Solenoid >> Removal and Installation

Removal and Installation

  1. Disconnect the pulse vacuum hublock (PVH) solenoid.
    1. Disconnect the harness connector.
    2. Remove the vacuum hose connector.
      Fig 1: Removing Vacuum Hose Connector
      G02776710Courtesy of FORD MOTOR CO.
  2. Remove the bolts and the PVH solenoid.
    Fig 2: Removing Bolts And PVH Solenoid
    G02776711Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals