Recalling a Stored Adjustable Pedal Position

Once the driver has stored a preferred adjustable pedal position, the driver can recall the setting by depressing the corresponding memory switch, or by using a programmed remote keyless entry transmitter. Recalling a stored adjustable pedal position can be accomplished by doing the following:

• The driver can recall a preferred adjustable pedal position by depressing one of the memory recall switches. Pressing memory switch 1 will initiate a recall of the adjustable pedal position stored in memory no. 1. Pressing memory switch 2 will initiate a recall of the adjustable pedal position stored in memory no. 2.
• A remote keyless entry transmitter can be used to recall previously set memory positions. The remote keyless entry transmitters are manufactured with an assigned personality number (1 or 2) and are so designated on the back of the remote keyless entry transmitter case. The remote keyless entry transmitter assigned to personality 1 is capable of only recalling memory position 1. Similarly, the remote keyless entry transmitters assigned with personalities 1 and 2 can recall memory positions 1 and 2 respectively.
• Memory recall occurs when the UNLOCK switch is pressed on the remote keyless entry transmitters. A second press of the UNLOCK switch, which unlocks the passenger doors, does not initiate a memory recall.
• A memory recall in progress does not prohibit the initiation of another memory recall; the most recently requested memory recall will be executed.