Removal and Installation

Remove the window switch (14529). Refer to SWITCH .
Remove the rear door trim panel (27406) and the rear door trim watershield. Refer to INTERIOR TRIM AND ORNAMENTATION .
Remove the door speakers. Refer to SPEAKERS .
Tape the window glass (25712) in the full up position.

Fig 1: Identifying Tape Window Glass
Courtesy of FORD MOTOR CO.
Disconnect the window regulator electric drive (23394).

Fig 2: Disconnecting The Window Regulator Electric Drive
Courtesy of FORD MOTOR CO.
Position the connector for the window regulator electric drive inside of the door.
Remove the bolts.

Fig 3: Removing The Bolts
Courtesy of FORD MOTOR CO.
Separate the window regulator electric drive from the rear door window regulator (23200).
Remove the window regulator electric drive from the door.
To install, reverse the removal procedure.