Roof Opening Panel Weatherstrip: Installation

Place a new weatherstrip into position on the glass assembly, with the splice (seam) on the passenger side.

Fig 1: Placing A New Weatherstrip Into Position On Glass Assembly
Courtesy of FORD MOTOR CO.
Starting with the corners, push the weatherstrip into position. Continue pushing the weatherstrip into position around the glass assembly until complete. Use a plastic or rubber hammer if necessary.
Install the roof opening panel. Refer to ROOF OPENING PANEL .
Adjust the roof panel. Refer to ROOF OPENING PANEL ALIGNMENT - HEIGHT ADJUSTMENT and ROOF OPENING PANEL ALIGNMENT - HORIZONTAL ADJUSTMENT .