LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches & Entry Systems -- Excursion & F250-F550 Super Duty >> Removal And Installation >> Tailgate Lock Cylinder >> Removal and Installation

Removal and Installation

  1. Remove the tailgate release handle. Refer to TAILGATE RELEASE HANDLE .
  2. Remove the lock cylinder.
    1. Remove the clip.
    2. Remove the lock cylinder.
      Fig 1: Removing Lock Cylinder
      G02774472Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals