LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Parking Aid System -- Excursion & F250-F550 Super Duty >> Removal And Installation >> Parking Aid Module - Super Duty >> Removal and Installation

Removal and Installation

  1. Remove the RH instrument panel insulator.
  2. Remove the parking aid module (PAM).
    1. Disconnect the electrical connectors.
    2. Remove the screw.
    3. Remove the upper pin-type retainer and the module as an assembly.
      Fig 1: Removing Parking Aid Module
      G02777690Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals