Removal and Installation

Remove the seat backrest. Refer to REAR SEAT BACKREST - EXCURSION, SECOND ROW .
Remove the seat handle clip and handle.

Fig 1: Removing Seat Handle Clip And Handle
Courtesy of FORD MOTOR CO.
Unclip the J-clips.

Fig 2: Uncliping J-Clips
Courtesy of FORD MOTOR CO.
Remove the spring pin and screw.

Fig 3: Removing Spring Pin And Screw
Courtesy of FORD MOTOR CO.
Remove the seat backrest cable retaining clip and the cable.

Fig 4: Removing Seat Backrest Cable Retaining Clip
Courtesy of FORD MOTOR CO.
Position the upholstery and pad, then remove the bolts.

Fig 5: Positioning Upholstery And Pad
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.