LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat System -- Excursion & F250-F550 Super Duty >> Disassembly And Assembly >> Rear Seat Cushion - Excursion, Second Row, 60 Percent >> Assembly

Rear Seat Cushion - Excursion, Second Row, 60 Percent: Assembly

  1. Position the seat cushion foam pad and upholstery to the seat cushion frame.
  2. Install the hog rings.
    Fig 1: Installing Hog Rings
    G02774075Courtesy of FORD MOTOR CO.
  3. Install the headrest guide pins.
  4. Fasten the J-clips and the hog rings.
    Fig 2: Fastening J-Clips And Hog Rings
    G02774076Courtesy of FORD MOTOR CO.
  5. Install the seat cushion frame. Refer to REAR SEAT CUSHION - EXCURSION, SECOND ROW .