LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 6.8 S, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat System -- Excursion & F250-F550 Super Duty >> Disassembly And Assembly >> Rear Seat Cushion - Excursion, Second Row, 40 Percent >> Disassembly and Assembly

Disassembly and Assembly

  1. Remove the cushion. Refer to REAR SEAT CUSHION - EXCURSION, SECOND ROW .
  2. Position the seat bottom cover, then unclip the J-clips and remove the hog rings.
    Fig 1: Removing Hog Rings
    G02774086Courtesy of FORD MOTOR CO.
  3. Remove the headrest guide pins.
    Fig 2: Removing Headrest Guide Pins
    G02774087Courtesy of FORD MOTOR CO.
  4. Remove the seat cushion from the seat frame.
  5. Position the upholstery back and remove the hog rings.
    Fig 3: Removing Hog Rings
    G02774088Courtesy of FORD MOTOR CO.
  6. Remove the upholstery from the seat cushion foam pad.
  7. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals