Disassembly and Assembly

Remove the rear bench seat backrest. For additional information, refer REAR SEAT BACKREST - BENCH, CREW CAB .
Remove the two armrest bracket bolts, if so equipped, to remove the armrest from the back assembly.

Fig 1: Removing Armrest Bracket Bolts
Courtesy of FORD MOTOR CO.
Remove the rubber insert.

Fig 2: Removing Rubber Insert
Courtesy of FORD MOTOR CO.
Remove the screws and cupholder.

Fig 3: Removing Screws And Cupholder
Courtesy of FORD MOTOR CO.
Unzip the armrest cover and remove from the armrest.

Fig 4: Removing From Armrest
Courtesy of FORD MOTOR CO.
Unfasten the seat back cover J-clips and remove the cover.

Fig 5: Unfastening Seat Back Cover J-Clips
Courtesy of FORD MOTOR CO.
Remove the seat back cushion foam pad from the seat back frame.

Fig 6: Removing Seat Back Cushion Foam Pad
Courtesy of FORD MOTOR CO.
Remove the four armrest bolts and remove armrest brackets.

Fig 7: Removing Armrest Bolts
Courtesy of FORD MOTOR CO.
To assemble, reverse the disassembly procedure.