Removal & Installation (Diesel)

Disconnect the vacuum pump harness connector. See Fig 1.
Remove the vacuum pump mounting bolts. See Fig 2.
Disconnect the vacuum hose and remove the vacuum pump and bracket. See Fig 3.
Remove the three ISO mounts and remove the vacuum pump from the bracket. See Fig 4.
To install, reverse removal procedure.

Fig 1: Identifying Vacuum Pump Harness Connector (Diesel)

Courtesy of FORD MOTOR CO.

Fig 2: Identifying Vacuum Pump Mounting Bolts (Diesel)

Courtesy of FORD MOTOR CO.

Fig 3: Removing Vacuum Pump (Diesel)

Courtesy of FORD MOTOR CO.

Fig 4: Identifying Vacuum Pump ISO Mounts (Diesel)

Courtesy of FORD MOTOR CO.