LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Excursion 5.4 L, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 587 (Front Suspension - Four Wheel Drive (4WD) -- F250-F550 Super Duty) >> Removal And Installation >> Stabilizer Bar >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the nuts and bolts and then disconnect the stabilizer bar links.
    Fig 1: Removing/Installing Stabilizer Bar Links Nuts And Bolts
    G03917854Courtesy of FORD MOTOR CO.
  2. Remove the nuts and the stabilizer bar.
    Fig 2: Removing/Installing Nuts And Stabilizer Bar
    G03917745Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals