LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Econoline E250, Van Cargo, 5.4 L >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Brake Rotor >> Removal & Installation (E150 & E250)

Removal & Installation (E150 & E250)

  1. Raise and support vehicle. Remove wheel. Remove brake hose-to-caliper bolt. Remove and plug brake hose. Remove caliper. See DISC BRAKE CALIPERS & PADS . Remove rotor.
  2. To install, reverse removal procedure. Install NEW copper washers when installing brake hose-to-caliper bolt. Tighten bolts and nuts. See TORQUE SPECIFICATIONS . Bleed brakes as necessary. See BLEEDING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals