LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2004 >> Econoline E250, Van Cargo Extended, 5.4 L >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Master Cylinder >> Removal & Installation (Hydro-Max)

Removal & Installation (Hydro-Max)

  1. Disconnect the battery ground cable.
  2. Remove the support bracket bolt and nut. See Fig 1.
  3. Disconnect the brake tubes.
  4. Remove the ground wire nut and the ground wire. See Fig 2.
  5. Remove the four master cylinder nuts. Remove master cylinder.
  6. To install, reverse the removal procedure. Bleed system as necessary. See BLEEDING BRAKE SYSTEM .
Fig 1: Identifying Hydro-Max Support Bracket
G00299519Courtesy of FORD MOTOR CO.
Fig 2: Identifying Ground Wire Nut
G00299520Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals