Brake Tubes and Hoses
CAUTION:
Never use copper tubing. It is subject to fatigue, cracking and corrosion, which could result in brake tube failure.
All brake tube fittings must be properly double flared to provide strong leakproof connections. When bending tubing to fit the underbody or rear axle contours, be careful not to kink or crack the tube. If a section of brake tube is damaged, the entire section must be replaced with a tube of the same type, size, shape and length. When replacing hydraulic brake tubing, hoses, or connectors, tighten all connections securely. After replacement, bleed the brake system.