Flywheel Check
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Using a suitable cleaning solution, clean the flywheel clutch surface.
Inspect the flywheel for:
- surface cracks.
- heat check.
- glazing.
- scoring.
- scratches or grooves.
- For minor damage, finish the flywheel surface with coarse emery cloth or with a fine grade (400 grit) sandpaper. To polish the surface, stroke parallel to the machine lines.
- Inspect the ring gear for:
- worn, chopped or broken teeth.
CAUTION:
Do not use petroleum based cleaning solutions.
NOTE:
Always inspect the flywheel whenever the clutch is removed or installed new.