General Specifications
WARNING: This page is about a different car, the 2007 Ford Pickup and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Lubricants and Sealants | |
| Motorcraft SAE 75W-140 High Performance Rear Axle Lubricant XY-75W140-QL (vehicles with the trailer towing option or 4:10 ratio) | WSL-M2C192-A |
| Additive Friction Modifier XL-3 | EST-M2C118-A |
| Premium Long-Life Grease XG-1-C or XG-1-K (Canada CXG-1-C) | ESA-M1C75-B |
| Clear Silicone Rubber TA-32 | ESB-M4G92-A |
| Threadlock and Sealer TA-25 | WSK-M2G351-A5 |
| Stud and Bearing Mount TA-27 | WSK-M2G349-A1 |
| Backlash Specifications | |
| Backlash between ring gear and pinion teeth | 0.203-0.304 mm (0.008-0.012 in) maximum |
| Ring gear maximum backlash variation between teeth | 0.102 mm (0.004 in) |
| Rotational Torque Ranges | |
| Pinion bearing preload | 1.8-3.3 N.m (16-29 lb-in) |
| Driver handle | 2.2 N.m (20 lb-in) |
| Initial minimum breakaway torque (Traction-Lok®) | 27 N.m (20 lb-ft) |
| Clearance Specifications | |
| Differential case maximum runout | 0.076 mm (0.003 in) |
| Pinion flange maximum radial runout in assembly | 0.305 mm (0.012 in T.I.R.) |
| Rabs sensor air gap | 0.127-1.143 mm (0.005-0.045 in) |