LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> ZX2 Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation >> Removal And Installation >> Pedal And Bracket >> Installation

Pedal And Bracket: Installation

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn its strategy.
  1. To install, reverse the removal procedure.
    Fig 1: Installing Brake Pedal Bracket Nuts
    G01370388Courtesy of FORD MOTOR CO.
    Fig 2: Installing Four Power Brake Booster Nuts
    G01370389Courtesy of FORD MOTOR CO.
    Fig 3: Installing Brake Pedal Bracket Nuts
    G01370390Courtesy of FORD MOTOR CO.
    Fig 4: Installing Clutch Master Cylinder Cover Plate Nut
    G01370391Courtesy of FORD MOTOR CO.
    Fig 5: Installing Hood Latch Control Handle
    G01370392Courtesy of FORD MOTOR CO.