LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> ZX2 Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Cluster And Panel Illumination >> Removal And Installation >> Switch - Coupe Shown, Sedan Similar >> Removal

Switch - Coupe Shown, Sedan Similar: Removal

  1. Remove the instrument panel upper finish panel insert.
    Fig 1: Removing The Instrument Panel Upper Finish Panel Insert
    G01373170Courtesy of FORD MOTOR CO.
  2. Remove the nut on the backside of the hood latch release handle.
    • Position the hood latch release handle aside.
    Fig 2: Positioning The Hood Latch Release Handle Aside
    G01373171Courtesy of FORD MOTOR CO.
  3. Remove the screw and the instrument panel steering column cover.
    Fig 3: Removing The Screw And The Instrument Panel Steering Column Cover
    G01373172Courtesy of FORD MOTOR CO.
  4. Disconnect the light switch rheostat resistor electrical connector.
    Fig 4: Disconnecting The Light Switch Rheostat Resistor Electrical Connector
    G01373173Courtesy of FORD MOTOR CO.
  5. Depress the locking tabs and remove the light switch rheostat resistor from the instrument panel steering column cover.
    Fig 5: Depressing The Locking Tabs
    G01373174Courtesy of FORD MOTOR CO.