Injection Control Pressure System
WARNING: This page is about a different car, the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2004 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fuel injection pressure is controlled by the injection control pressure (ICP) system. The ICP system consists of the following:
- On early build vehicles, the ICP sensor located in the high-pressure pump cover.
- On late build vehicles, the ICP sensor is mounted in the right valve cover.
- injection pressure regulator valve located in the high-pressure pump cover.
- powertrain control module
- High-pressure oil pump