LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Mustang Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1635 (Engine - 6.0L Diesel -- F250-F550 Super Duty 6.0L (99P F450/550)) >> In-Vehicle Servicing >> Valve Cover - RH >> Removal And Installation >> Vehicle with automatic transmission

Vehicle with automatic transmission

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Transmission Fluid Indicator Retaining Nut
G03899172Courtesy of FORD MOTOR CO.
    NOTE: Use a 6-point socket squarely seated on the retaining nut for removal.
  1. Remove the retaining nut and position the transmission fluid indicator and tube assembly aside.
    • Discard the retaining nut.
scientia non olet · About LEMON Manuals