LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Focus SVT, 4D Hatchback >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation -- Brake Booster >> Removal And Installation >> Brake Booster >> Installation

Brake Booster: Installation

    CAUTION: Make sure that the brake booster actuator rod is correctly positioned through the bulkhead rubber boot.
    CAUTION: Make sure the brake booster gasket is correctly positioned on the brake booster before installation.
    Fig 1: Installing Brake Booster
    G01610737Courtesy of FORD MOTOR CO.
  1. To install, reverse the removal procedure.
  2. Bleed the brake system. For additional information, refer to BLEEDING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals