LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Focus SVT, 2D Hatchback >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Overhaul >> Front Brake Caliper >> Disassembly

Front Brake Caliper: Disassembly

  1. Remove caliper. See FRONT BRAKE CALIPER & PADS  under REMOVAL & INSTALLATION.
  2. Place shop towels or block of wood in caliper to prevent damage to piston. Slowly apply air pressure in brake hose bore to remove piston.
  3. Remove piston from caliper.
  4. Remove dust boot. See Figure.
  5. Being careful not to scratch caliper bore, remove piston bore seal.
scientia non olet · About LEMON Manuals