LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Excursion 7.3 F, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System Actuation - Excursion & F250-F550 Super Duty >> Removal And Installation >> Brake Pedal Motor Cable >> Removal and Installation

Removal and Installation

  1. Disconnect the brake pedal motor electrical connector.
    Fig 1: Disconnecting Brake Pedal Motor Electrical Connector
    G01543437Courtesy of FORD MOTOR CO.
  2. Remove the brake pedal motor bolts.
    Fig 2: Removing Brake Pedal Motor Bolts
    G01543438Courtesy of FORD MOTOR CO.
  3. Remove the brake pedal to motor cable (2C431).
    Fig 3: Removing Brake Pedal To Motor Cable
    G01543439Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals