LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Excursion 7.3 F, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System Actuation - Excursion & F250-F550 Super Duty >> Removal And Installation >> Brake Fluid Reservoir >> Removal

Brake Fluid Reservoir: Removal

WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink water and induce vomiting. Get medical attention immediately.
  1. Disconnect the brake master cylinder fluid level switch.
    Fig 1: Disconnecting Brake Master Cylinder Fluid Level Switch
    G01543449Courtesy of FORD MOTOR CO.
  2. Use a suitable suction device to drain the brake master cylinder reservoir.
  3. Carefully pry up on the brake master cylinder reservoir to remove.
    Fig 2: Removing Brake Master Cylinder Reservoir
    G01543450Courtesy of FORD MOTOR CO.