Test MD: Pcm ROM Failure: Testing
FAULT CODE SETTING CONDITION
| Fault Code | KOEO | KOER | Continuous Memory |
|---|---|---|---|
| P0605 | Test MD , Step 1) | Test MD , Step 1) |
NOTE:
After each service or repair procedure has been completed, reconnect all components. Clear DTCs and repeat QUICK TEST procedures to ensure all electronic engine control systems are working properly and DTCs are no longer present.
- 1) KOEO & Continuous Memory DTC P0605: Internal PCM ROM Failure
DTC P0605 indicates that an internal ROM failure has occurred in PCM. Repeat QUICK TEST . If DTC P0605 is set, replace PCM. Clear DTCs and retest. If DTC P0605 is not set, no concern is indicated at this time.