LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Excursion 6.0 P, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (ENGINE CONTROLS - SELF-DIAGNOSTICS - 7.3L (995, 996 F650/750, 99F E Series & 99F F450/550) DIESEL) >> Drive Cycles >> Description

Drive Cycles: Description

WARNING: This page is about a different variant/trim than selected.

Primary function of drive cycle procedure is to clear DTC P1000 and to satisfy specifications for SAE J1979. Each OBD-II monitor must run during drive cycle. If drive cycle has been completed and DTC P1000 is not cleared, repeat entire drive cycle. If a particular step is interrupted, repeat drive mode. If drive cycle is interrupted with a key-off, only drive modes that were incomplete must be run.

scientia non olet · About LEMON Manuals