Accessing Freeze Frame PID Data (New Generation Star Tester)

WARNING: This page is about a different variant/trim than selected.

To access freeze frame data mode, turn ignition off. Ensure test equipment is properly attached. Using NGS tester, perform the following steps:

Select VEHICLE & ENGINE SELECTION menu.
Select NEW VEHICLE, YEAR & MODEL, with appropriate qualifier if needed. Such as transmission, Federal, California, etc.
Follow operating instructions from scan tool menu.
Select GENERIC OBD-II FUNCTIONS. Press CONT button if all OBD-II monitors are incomplete.
Turn ignition on.
Select FREEZE FRAME PID REQUEST.