Removal and Installation

Axle Shaft

Removal and Installation
1. Set the parking brake.





2. Remove the axle shaft bolts.
^ Place a drain pan under the rear hub.





3. Remove the axle shaft.





4. Inspect the following components:
^ The O-ring for damage. Replace as necessary.
^ The axle shaft for cracked material around the holes or oversized holes. Replace as necessary.





5. NOTE: Lubricate the O-ring with Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.

To install, reverse the removal procedure.