Power Steering Pump Pulley - CII Pump

Power Steering Pump Pulley - CII Pump

Special Tool(s):

Special Tool(s)

Removal
1. Remove the drive belt.





2. Using the special tool, remove the power steering pump pulley.

Installation

CAUTION: Replacement of the power steering pump pulley is necessary after being removed and installed two times.





1. Using the special tool, install the power steering pump pulley.
- Inspect the pulley for paint marks in the web area near the hub. If there are two paint marks, discard the pulley. If there is no paint or one paint mark, use a paint pencil to mark the web area of the pulley near the hub.
2. Install the drive belt.