LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Excursion 2WD V8-6.0L DSL Turbo >> Repair and Diagnosis >> Restraints and Safety Systems >> Seat Belt Systems >> Seat Belt Buckle >> Service and Repair >> Second Row >> Quad Seat

Quad Seat

REMOVAL
1. Remove the side shield.







2. Remove the bolt and the safety belt buckle.

NOTE: The LH side is shown, the RH side is similar.

INSTALLATION
1. To install, reverse the removal procedure.
^ See the Removal Procedure or Specifications for torque specifications.

NOTE: Make sure to tighten the bolts to specification.

2. Check the active restraints for correct operation.
scientia non olet · About LEMON Manuals