LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Escape 3.0 1, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments >> Parking Brake Cable >> Vehicle With High Series Floor Console

Vehicle With High Series Floor Console

  1. Apply the parking brake. Remove the floor console finish panel.
  2. Remove the adjustment nut clip. See Figure .
  3. Turn the parking brake control adjustment nut so that the parking brake control stroke is three to five notches when pulled.
  4. Confirm the parking brake is applied.
  5. Install the adjustment nut clip.
  6. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals