Description And Operation: GEARTRAIN: Notes
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Power is transmitted from the torque converter to the geartrain components through the input shaft and forward clutch cylinder.
- By holding or driving certain members of the gearset, 5 forward ratios and one reverse ratio are obtained and transmitted to the output shaft. The ratios are as follows:
| Gear Ratio | |
|---|---|
| 1st | 3.114 to 1 |
| 2nd | 2.218 to 1 |
| 3rd | 1.545 to 1 |
| 4tha | 1.096 to 1 |
| 5tha | 1 to 1 |
| 6tha | 0.712 to 1 |
| Reverse | 2.88 to 1 |
a Special operating strategy is enabled when transmission temperature is less than -15°C (5°F)