Transmission Fluid Drain And Refill - Automated Equipment: Draining
WARNING: This page is about a different car, the 2008 Ford Pickup, 2008 Ford F550 Super Duty, 2008 Ford F450 Super Duty, and 2008 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Always refer to the instructions supplied with the flush and fill machine.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
- Use a suitable flush and fill machine to change the fluid.
- When connecting the flush and fill machine, connect the machine to the transmission fluid cooler tube after the transmission fluid cooler on the cooler return tube. This will help remove any foreign material trapped in the transmission fluid coolers.