LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2835 (Four Wheel Drive (4WD) Systems -- F250-F550 Super Duty) >> Removal And Installation >> Mode Select Switch (MSS) >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2012 Ford Pickup, 2012 Ford F550 Super Duty, 2012 Ford F450 Super Duty, and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Disconnect the wiring harness connector.
  3. Press the 3 locking tabs to release the Mode Select Switch (MSS) switch and remove the MSS switch from the finish panel.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals