LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2804 (Engine Mechanical - 6.2L (2V) - F250-F350 Super Duty) >> In-Vehicle Repair >> Oil Pump >> Removal

Oil Pump: Removal

WARNING: This page is about a different car, the 2012 Ford Pickup and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the fuel pressure. For additional information, refer to FUEL SYSTEM - GENERAL INFORMATION - GASOLINE AND DIESEL .
  2. Remove the timing drive components. For additional information, refer to Timing Drive Components .
  3. Remove the oil pump screen and pickup tube. For additional information, refer to Oil Pump Screen and Pickup Tube .
  4. Remove the 2 upper bolts, the 2 lower stud bolts and the oil pump.
Fig 1: Locating Oil Pump Upper Bolts And Lower Stud Bolts
G06518264Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals