LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2804 (Engine Mechanical - 6.2L (2V) - F250-F350 Super Duty) >> In-Vehicle Repair >> Engine Oil Pressure (EOP) Switch >> Installation

Engine Oil Pressure (EOP) Switch: Installation

WARNING: This page is about a different car, the 2012 Ford Pickup and 2012 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the EOP switch.
    • Stage 1: Tighten to 14 Nm (124 lb-in).
    • Stage 2: Tighten an additional 180 degrees.
  2. Connect the EOP switch electrical connector and attach the wiring harness retainer.
scientia non olet · About LEMON Manuals