Removal and Installation
WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the tailgate release handle. For additional information, refer to HANDLES, LOCKS, LATCHES & KEYLESS ENTRY SYSTEM .
- Remove the 2 push nuts.
- Disconnect the electrical connector.
- Remove the video camera from the tailgate release handle.
- To install, reverse the removal procedure.