Removal and Installation
WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- If replacing the PAM
only, proceed as follows:
- Disconnect the electrical connectors.
- Remove the 2 pin-type retainers and the PAM .
- If replacing the parking aid speaker only, proceed as follows:
- Disconnect the parking aid speaker electrical connector.
- Disengage the parking aid speaker clips.
- Remove the parking aid speaker.
- To install, reverse the removal procedure.