Turbocharger Assembly

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Click here or refer to the on-line Workshop Manual to view this illustration as an interactive exploded view, requires Adobe® Acrobat® 8.0 or higher.

NOTE: Click here or refer to the on-line Workshop Manual to learn about using an Interactive Illustration.

NOTE: Turbocharged vehicles under 6350 kg (14,000 lb) Gross Vehicle Weight Rating (GVWR) shown in the illustration, turbocharged vehicles over 6350 kg (14,000 lb) GVWR similar.

Fig 1: Exploded View Of Turbocharger Assembly

Courtesy of FORD MOTOR CO.

TURBOCHARGER ASSEMBLY PARTS DESCRIPTION CHART

Item	Part Number	Description
1	-	Turbocharger wastegate actuator vacuum supply hose (part of 9D430) (if equipped)
2	9U469	Turbocharger coolant outlet tube
3	W500120	Turbocharger bolt (4 required)
4	6K682	Turbocharger
5	6466	Turbocharger gasket
6	6B689	Turbocharger oil supply tube
7	6A968	Turbocharger coolant tube fitting
8	6A968	Turbocharger oil supply tube fitting

NOTE: Vehicles with over 6350 kg (14,000 lb) Gross Vehicle Weight Rating (GVWR), will only have the lower turbocharger inlet boot and no wastegate actuator.

Refer to the procedures and/or exploded views in this service information for any Warnings, Notices, Notes, Materials, Specifications, and Special Tools. Items in the exploded views may not be listed in order of removal.