LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2638 (Anti-Theft - Passive Anti-Theft System (Pats) -- F250-F550 Super Duty) >> Removal And Installation >> Passive Anti-Theft System (PATS) Transceiver >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the the lower steering column shroud. For additional information, refer to STEERING COLUMN .
  2. Disconnect the Passive Anti-Theft System (PATS) transceiver electrical connector.
  3. Using a suitable tool (such as a dentist pick), unclip the 2 tabs and remove the PATS  transceiver.
  4. To install, reverse the removal procedure.
    NOTE: Replacement of the PATS  transceiver does not require the Integrated Keyhead Transmitters (IKTs) keys to be programmed into the Body Control Module (BCM).
scientia non olet · About LEMON Manuals