LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2638 (Anti-Theft - Passive Anti-Theft System (Pats) -- F250-F550 Super Duty) >> Diagnosis And Testing >> Anti-Theft >> Principles of Operation >> Spare Key Programming

Spare Key Programming

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

The customer spare key programming allows spare keys to be programmed (up to a maximum of 8) to the BCM  without having to use a scan tool. Two programmed keys are required to carry out the procedure. This procedure can be disabled so that spare keys can only be programmed to the vehicle using a scan tool. Refer to KEY PROGRAMMING - PROGRAM A KEY USING TWO PROGRAMMED KEYS . for the customer spare key programming procedure or Key Programming - Enable/Disable Spare Key Programming  . for the enable/disable procedure.

scientia non olet · About LEMON Manuals