Special Tool(s)
WARNING: This page is about a different car, the 2011 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS DESCRIPTION CHART
| 2 Jaw Puller 205-D072 (D97L-4221-A) or equivalent | |
| Adapter for 205-S127 205-111 (T76P-4020-A11) | |
| Adapter for 205-S156 205-159 (T80T-4020-F42) | |
| Adapter for 205-S156 205-160 (T80T-4020-F43) | |
| Collects, Differential Carrier Bearing 205-430 (Part of 205-S419) | |
| Depth Gauge/Aligner, Drive Pinion 205-937 | |
| Depth Gauge, Drive Pinion 205-423 | |
| Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent | |
| Drawbar, Rear Axle 205-098 (T75T-1176-A) | |
| Gauge, Clutch Housing 308-021 (T75L-4201-A) | |
| Gauge Tube 205-D038 (D81T-4020-F51) | |
| Handle (Long) 205-D055 (D81L-4000-A) or equivalent | |
| Holding Fixture, Drive Pinion Flange 205-126 (T78P-4851-A) | |
| Installer, Differential Carrier Bearing 205-D044 (D81T-4221-A) or equivalent | |
| Installer, Differential Shim 205-228 (T85T-4067-AH) | |
| Installer, Drive Pinion Bearing 205-231 (T85T-4616-AH) | |
| Installer, Drive Pinion Bearing 205-232 (T85T-4621-AH) | |
| Installer, Drive Pinion Flange 205-936 | |
| Installer, Drive Pinion Flange 205-435 | |
| Installer Drive Nut, Drive Pinion Flange 205-437 | |
| Installer, Drive Pinion Oil Seal 205-935 | |
| Installer, Drive Pinion Oil Seal 205-440 | |
| Installer, Input Shaft Bearing Cup 308-391 | |
| Plate, Bearing/Oil Seal 205-090 (T75L-1165-B) | |
| Protector, Drive Pinion Thread 205-229 (T85T-4209-AH) | |
| Removal Screw, Bearing Tube 308-092 (T84T-7025-B) | |
| Remover, Tube 308-052 (T77J-7025-B) | |
| Retaining Ring, Differential Carrier Bearing 205-431 (Part of 205-S419) | |
| Step Plate, Differential Carrier Bearing 205-432 (Part of 205-S419) |