Removal and Installation
WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the steering column shrouds. For additional information, refer to STEERING COLUMN .
- Place the steering column tilt lever in the unlocked position.
- Disconnect the ignition switch electrical connector.
- Press the 2 locking tabs and remove the ignition switch.
- To install, reverse the removal procedure.