LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2609 (Steering Column Switches -- F250-F550 Super Duty) >> Removal And Installation >> Circuit Deactivation Ignition Module (CDIM) >> Installation

Circuit Deactivation Ignition Module (CDIM): Installation

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector.
  2. Position the CDIM  and install the 2 pin-type retainers.
    • If the CDIM  is being installed new as a dealership option, the PCM must be enabled. For additional information, refer to the Extended Idle Shutdown Initialization General Procedure in ELECTRONIC ENGINE CONTROLS - DIESEL ENGINE .
scientia non olet · About LEMON Manuals