Wheel Hub: Removal

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

All vehicles

Remove the wheel and tire. For additional information, refer to TIRES & WHEELS .
Remove the brake caliper anchor plate. For additional information, refer to REAR DISC BRAKES .

Fig 1: Locating Brake Caliper Anchor Plate
Courtesy of FORD MOTOR CO.
Remove the axle shaft. For additional information, refer to AXLE SHAFT .

Fig 2: Locating Axle Shaft
Courtesy of FORD MOTOR CO.

F-350
Using the Wheel Hub Nut Socket, remove the hub nut.
NOTE: Make sure that the drive tangs on the Wheel Hub Nut Socket engage the 4 slots of the hub nut.

Fig 3: Removing Hub Nut Using Wheel Hub Nut Socket
Courtesy of FORD MOTOR CO.

F-450 and F-550
Using a suitable socket, remove the hub nut.

Fig 4: Removing Hub Nut Using Socket
Courtesy of FORD MOTOR CO.

All vehicles
Remove the outer rear wheel bearing.

Fig 5: Locating Outer Rear Wheel Bearing
Courtesy of FORD MOTOR CO.
Remove the rear hub and brake disc assembly.
Remove the 8 bolts and separate the rear hub from the rear brake disc.

Fig 6: Locating Rear Hub Bolt
Courtesy of FORD MOTOR CO.
Inspect the rear hub for the following:
- Cracks and damage around the bolt holes.
- Oversized holes.