LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2592 (Rear Suspension -- F250-F550 Super Duty) >> Removal And Installation >> Wheel Studs - Single Rear Wheel (SRW) >> Removal

Wheel Studs - Single Rear Wheel (SRW): Removal

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear wheel hub assembly. For additional information, refer to WHEEL HUBS AND BEARINGS - FULL FLOATING AXLE - DANA .
  2. Using the C-Frame and Screw Assembly, remove and discard the wheel stud.
    Fig 1: Removing Wheel Stud Using C-Frame And Screw Assembly
    G06136801Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals