LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Cutaway 7.3 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 2587 (Fuel Tank & Fuel Lines -- F250-F550 Super Duty) >> Disassembly And Assembly >> Fuel Conditioning Module - 6.7L Diesel >> Disassembly

Fuel Conditioning Module - 6.7L Diesel: Disassembly

WARNING: This page is about a different car, the 2011 Ford Pickup, 2011 Ford F550 Super Duty, 2011 Ford F450 Super Duty, and 2011 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the drain plug.
  2. Remove the water-in-fuel sensor.
    3. NOTE: Depending on the amount of the O-ring seal swelling, removal of the fuel filter cover may be noisy and require some effort.
  3. Remove the fuel filter cover.
    • Remove the O-ring seal from the fuel conditioning module housing.
  4. Remove and discard the fuel filter.
  5. Remove the 2 bolts, the 2 spacers and the fuel conditioning module housing.
scientia non olet · About LEMON Manuals